Ingress Protection Testing Equipment

IP 1X Probe

Specification
IP 1X Probe
Sphere Dia = 50 mm
Handle = Ø10 X 100 mm length
Guard = Ø45 X 4 mm thickness

Standard IS/ IEC – 60529, EN 60529

IP 2X probe (Jointed Test Finger) (Test Probe B)

Specification
Knurled Finger Diameter = 12mm
Knurled Finger Length = 80mm
Baffle Plate Diameter = 50mm
Baffle Plate Thickness = 5 mm
Standard IS/ IEC – 60529, EN 60529

IP 2X Probe Sphere

Specification
Sphere Dia = 12.5 mm
Handle = Ø10 X 100 mm length

Standard IS/ IEC – 60529, EN 60529

IP 3X Probe

Specification
Length of test Rod = 100 mm
Test Rod Dia = 2.5 mm
Diameter of Sphere = Ø35 mm
Length of Handle = 100 mm
Handle Dia = 10 mm

Standard IS/ IEC – 60529, EN 60529

IP 4X Probe

Specification
Length of test Rod = 100 mm
Test Rod Dia = 1 mm
Diameter of Sphere = Ø35 mm
Length of Handle = 100 mm
Handle Dia = 10 mm

Standard IS/ IEC – 60529, EN 60529

Low Voltage Panel

Specification
Voltage = 0 to 45 V
Digital Voltage Indicator
ON OFF switch
Two cable with banana connector
Material M.S. with fully powder coated

Standard IS/ IEC – 60529, EN 60529

Dust Chamber ( IPX5X6)

The CKE dust test chamber is used to test the sealing performance of the product shell. It is mainly used for the test of two grades of IP5X and IP6X for enclosure protection grade. Through the simulation of sand and dust weather, outdoor lamps, auto parts, outdoor cabinets, power meters and other products are tested.

Vertical Rain Test / Drip Test Apparatus

The CKE Vertical Rain Test apparatus is to verify Protection against Vertically Falling Water Drops. It is designed and manufactured in accordance with the standard requirement of IEC60529 clause IPX1 and IPX2. The rise and fall of the drip box is controlled by the motor. It is equipped with the rotatable objective table whose rotating speed is 1r/min for IPX1 test. It is also equipped with 15°bevel for supporting sample for the IPX2 test. What's more, this device is with the clean water filtration unit which can prevent pinhole from jamming.

Oscillating Tube Test / Oblique Rain Test ( IP X3 X4)

Oscillating tube tester is designed and manufactured in accordance with the standard requirement of IEC60529 IPX3 and IPX4. It is used for the waterproof test of the electrical equipment. The oscillating tube part of this device is controlled by adjustable-speed motor and crank-link mechanism. This device is reciprocating swing from the place of ±60°to another one of ±170°with the speed required by the standard through machine adjusting angle.
The angle adjustment is accurate. The structure is stable and durable. It is equipped with rotating stage through which the rotating of 90°can be achieved. It is also equipped with clean water filtration unit to prevent the pinhole from jamming.

Hand Held Shower

The Spray Tester IPX 3/4 is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using the flow control knob on the device to give the required flow rate. The pressure can be seen on the gauge which is convenient positioned by the Spray Tester IPX 3/4.The spray pattern of the nozzle is made to the specifications of IE6C0529. The removable shield feature make it easy to test without the interference of the shield

Water Jet ( IP X5 X6 )

IPX5 IPX6 Water jetting test chambers to perform test of water projected by a nozzle (6.3mm ) against enclosure from any direction shall have no harmful effects and water projected in powerful jets (12.5 mm nozzle ) against the enclosure from any direction shall have no harmful effects.It applied to plastics, rubber, paint, coatings, printing ink, paper, pharmaceuticals, food, cosmetics, textiles, auto parts, packaging materials, building materials, electricity and the electrical products; it provide an important testing data for scientific research, product development and quality control

Immerse Tank ( IP X7 )

The main function of this equipment is to test the physical and other related properties of the products in the simulated rainy weather for products such as electrical and electronic products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their components and parts. After the test, through the test to determine whether the performance of the product meet the requirements in order to facilitate product design, improvement, testing and factory inspection.

Water Resist Tank ( IPX7X8)

The main function of this equipment is to test the physics and other related performances of the products under conditions of simulated rain and weather in products such as electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles, and their parts and components. After the test, the quality of the product can be judged through the verification to meet the requirements, so that the product can be used in design, improvement, verification and factory inspection.

Rain Test Chamber ( IPX9)

The main function of this equipment is to test the physical and other related properties of the products in the simulated rainy weather for products such as electrical and electronic products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their components and parts. After the test, through the test to determine whether the performance of the product meet the requirements in order to facilitate product design, improvement, testing and factory inspection.

Water Supply Unit

Structure Material S.S.
Water Flow Rota meter Acrylic.0.5to15, 12 to 120 LPM, 2 Nos.
Pressure gauge of S.S 2 Kg/cm².
All detail suitable for as per standard with water pressure and flow indicator
Control valve manually,
Pump flow and pressure suitable with standard
This unit you can use in for IP X1X2X3X4X5 and X6 tester,
Power Supply: 440 Vac 50-60Hz,Three Phase with N
Size: 800 x 1650 x 1000 (W X H X L)

Other Services

  • Low & Medium Voltage Switch Gear Testing Equipment

    Secureness Test ApparatusThe Secureness Test Apparatus application is Checking of connector, MCB,RCCB, Lug cable clamping. Pull out Test ApparatusThe Pull out test apparatus application is check tha all material strength

  • Fire Hazard Testing Equipment

    Glow Wire Test AppratusThe Comparative Tracking Index Test Apparatus is widely used for testing the electrical and electronic product like lighting equipment, low-voltage apparatus and electrotechnical instrument. UL 94 Flammability